Updating Wode System Firmware
http://www.wodejukebox.com/download/WODEUpdate.2.8x.zipThis release contains 2 builds
2.8A - Read/Write NTFS
2.8B - Read only NTFS
Changelog:
Code:
MCU 2.8B FPGA 2.00 27/04/11
[GUI] increased speed on menu scrolling
[main] adds "stealth-mode" option on drive emulation
[kernel] fixed ODD motor-stop command at boot
[kernel] fixed stuck on "Loading..." w/ motor-stop cmd enabled and ODD is missing
[kernel] fixed bus protocol bug
[kernel] NTFS Read-Only support for NTFS
MCU 2.8A FPGA 2.00 27/04/11
[GUI] increased speed on menu scrolling
[main] adds "stealth-mode" option on drive emulation
[kernel] fixed ODD motor-stop command at boot
[kernel] fixed stuck on "Loading..." w/ motor-stop cmd enabled and ODD is missing
[kernel] fixed bus protocol bug
[kernel] NTFS R/W support for NTFS
To update the Wode's system firmware, download the package and copy the "update.bin" file into root of SD card formatted with the FAT filesystem. Insert the SD card into Wode and power on the console. Wode will then display the message "Wode Updating". The update process can take several minutes, when the update is complete Wode will reboot. The SD card can then be removed.
If you have troubles with SD card detection try to format it with the tool located here:
http://panasonic.jp/support/global/cs/s ... index.html
